Vanish A & B Cleaner

$35.66$110.25 Inc GST

Our shipping is available within the Perth, Metro area. Please email for costing on orders outside of the state.

SKU: N/A Category:


Vanish A & B Cleaner

VANISH is a two pack bleach cleaner designed for natural stone surfaces – in particular Sandstone.

Natural dark stains in the surface matrix of the Sandstone are particularly resistant to strong acid cleaning alone but are much more susceptible to removal using the speciality formulated two part product.


  • Always wear Personal Protective Equipment (PPE) – A minimum
    requirement of Safety Glasses, Gloves & Boots. Damage to clothing
    may occur.
    VANISH Part A and Part B should be applied sequentially as
    diluted solutions. Note: Do not mix Part A & B together.
    1. Lightly wet the area with fresh water.
    2. Mix VANISH Part A at 200 ml per 1L of water in a plastic watering can and apply to 3-5 m2 at a time.
    3. Mix VANISH Part B at 500 ml per 1L of water in a plastic watering can and apply to the area treated with VANISH Part A.
    4. As the masonry mildly fizzes, agitate gently with an ENVIRONEX EAGER BEAVER. Let the area lightly fizz for 2-3 minutes only.
    (DO not use a higher concentration or longer active time as it will cause damage).
    5. Rinse the area with fresh water.
    6. Neutralise the area with a capful of REFRESH pH neutral Detergent in 5-10L of water.
    7. Rinse with fresh water.
    Always test first.



Additional information

Litre Kit

3, 15